Fabric Inspection Machine

  Inspection Machine Model MC90FTL and MC90RTL have been designed to perform control operations at best in the finishing process ( wool sector. cotton fiber sector, artificial and synthetic fibers); they are generally used for weft-warp fabrics.
The rolling unit is provided with automatic alignment of the selvedges. The compactness of the exit roll can be regulated manually, by mean of a turning knob.
The tension of the fabric is always controlled and kept constant thanks to a synchronization systerm operated by a dandy roller device.
The machine is equiped with an electronia meter counter and the measurements are shown on a display positioned on the electric box on the right hand side of the operator.
The machine is provided with an end-piece photoelectric cell at the inlet, which brings the machine to stop when the inspected fabrics is finished.
Fabric Inspection Machine (MC90FTL &MC90RTL)
Max. Width: Length of Inspecting table +650mm
MC90FTLMC90RTL
Rolls Width1800mm,2000mm,2200mm,2700mm,3500mm1800mm,2000mm,2200mm,2700mm,3500mm
Working Width1650mm,1850mm,2050mm,2550mm,3350mm1650mm,1850mm,2050mm,2550mm,3350mm
Mechanical speed5-50m/min.5-50m/min.
Installed Electric Power1.3KW1.3KW
Noise Average Level55dB55dBThe inlet of the fabric in both models is from lap(Inlet from roll, by means of an idle Cradle, is optional);the exit id on lap in Model MC90FTL and on roll in the back of the operator in model MC90RTL. Fabric Inspection Machi